Sign Out
How should HYLO GEL be applied: Do not use HYLO GEL if any part of the protective seal on the folding carton is broken or damaged before using for the first time.
Step 1: Remove the cap before use.
To do this, hold the cap above the bottle. With your other hand, pull away the bottle from the cap with a rotary movement. Before the first application turn the HYLO GEL bottle with its tip down and press the bottom of the bottle repeatedly until the first drop appears at the nozzle. Now the bottle is ready for further use.
Step 2: Hold the bottle upside down and place your thumb on the shoulder of the bottle and the other fingers on the base of the bottle.
Step 3: Support the hand holding the COMOD-bottle with your other hand.
Step 4: When applying the eye drops, avoid any contact between the tip of the bottle and your eye and skin. With your head leaning back slightly, gently pull down your lower eyelid. Press the base of the bottle vigorously and quickly. This activates the mechanism to release one drop. Because of the special COMOD valve system, the size and speed of each drop remain constant regardless of the pressure applied to the base of the bottle. Slowly close your eyes to allow the fluid to spread evenly on the eye surface.
Step 5: Replace the cap immediately and carefully after use. Ensure that the dropper tip is dry.
Contact the manufacturer in case of any question about correct use of this medical device.
A bottle containing 10 ml of solution corresponds to approximately 300 drops.
For technical reasons a small amount always remains in the bottle.
HYLO GEL is suitable for long term treatment and can be used by adults and children without limitation of age.
Each bottle HYLO GEL should be used only by the same person.
